Nylon 12 Glass-filled
that allows complex and resistant models. It is durable and
strong that’s why it perfectly fits technical uses. Nylon 12 Glass-
filled(Off White) is used in many industries such as the
automotive industry. It can be placed near engines and used for
parts that require a lot of stresses and loads.
Lead Time
3~4 days
Lead Time
3~4 days
Lead Time
3~4 days
Lead Time
3~4 days
- Best For
- Form and fit testing
- Functional prototyping and testing
- Low-volume end-use plastic parts
- Housings
- Brackets
- High-temperature jigs and fixtures
- Wear-resistant moving parts
- Complex internal channels, flow paths, and lattice structures
- Not Ideal For
- Form and fit testing
- Functional prototyping and testing
- Low-volume end-use plastic parts
- Housings
- Brackets
- High-temperature jigs and fixtures
- Wear-resistant moving parts
- Complex internal channels, flow paths, and lattice structures
Performance Snapshot
Material Characteristics at a Glance
Relative performance profile across key engineering parameters. Values are contextual — not absolute stress ratings.
Strength
Low
Source score: 2/5
Toughness / Impact Resistance
Low
Source score: 2/5
Rigidity
Medium
Source score: 3/5
Heat Resistance
High
Source score: 4/5
Weather Resistance
Medium
Source score: 3/5
Chemical / Corrosion Resistance
Medium
Source score: 3/5
Wear Resistance
High
Source score: 4/5
Surface Finish Quality
Low
Source score: 2/5
Lightweight
Medium
Source score: 3/5
Performance Snapshot
Surface Finish Options
Available finish options for Nylon 12 Glass-filled in Off White. Cost badges are shown only when confirmed in the material data.
As Printed
Ra 10-18 μm (as printed)
Best for:0.1mm; Ra 10-18 μm (as printed); ± 0.3% (minimum of ± 0.3mm)
As Printed
Ra 10-18 μm (as printed)
Best for:0.1mm; Ra 10-18 μm (as printed); ± 0.3% (minimum of ± 0.3mm)
As Printed
Ra 10-18 μm (as printed)
Best for:0.1mm; Ra 10-18 μm (as printed); ± 0.3% (minimum of ± 0.3mm)
As Printed
Ra 10-18 μm (as printed)
Best for:0.1mm; Ra 10-18 μm (as printed); ± 0.3% (minimum of ± 0.3mm)
Industries & Applications
Where Nylon 12 Glass-filled Delivers
Key applications mapped from the material data sheet.
Engineering / Industrial Applications
- Form and fit testing
- Functional prototyping and testing
- Low-volume end-use plastic parts
Engineering / Industrial Applications
- Form and fit testing
- Functional prototyping and testing
- Low-volume end-use plastic parts
Engineering / Industrial Applications
- Form and fit testing
- Functional prototyping and testing
- Low-volume end-use plastic parts
Engineering / Industrial Applications
- Form and fit testing
- Functional prototyping and testing
- Low-volume end-use plastic parts
Engineering / Industrial Applications
- Form and fit testing
- Functional prototyping and testing
- Low-volume end-use plastic parts
All values are typical from standard build conditions at 23°C ambient. Actual results may vary with part geometry, wall thickness, build orientation, and post-cure parameters. Contact our engineering team for tight-tolerance critical applications or qualification requirements.
All values are typical from standard build conditions at 23°C ambient. Actual results may vary with part geometry, wall thickness, build orientation, and post-cure parameters. Contact our engineering team for tight-tolerance critical applications or qualification requirements.
Industries & Applications
Ready to Order?
Upload your 3D file and receive a quote for Nylon 12 Glass-filled parts. Typical turnaround is 3~4 days from order confirmation.
Every order includes:Dimensional inspection report · NDA-ready file handling · Pre-shipment QC photography · DDP door-to-door logistics · Engineering review on request
Talk to a Process Engineer
Have a tight-tolerance or complex geometry requirement? Our engineers review your drawing before quoting to flag potential issues.
Compare & Decide
Related & Alternative Materials
Nylon 12 Glass-filled(Black)
SLS · Black
The surface of Nylon 12 Glass-filled(Black) is black and slightly granular and porous. Nylon Glass-filled is more durable and resistant than Nylon PA12. It gives you great freedom in your designs allowing for both complex and inclosed volumes. The material is great for technical parts that need resistance and loads. The surface is not as accurate as polyamide 12 but it will fit the requirements of technical parts.
Nylon 12 Glass-filled(Black)
SLS · Black
The surface of Nylon 12 Glass-filled(Black) is black and slightly granular and porous. Nylon Glass-filled is more durable and resistant than Nylon PA12. It gives you great freedom in your designs allowing for both complex and inclosed volumes. The material is great for technical parts that need resistance and loads. The surface is not as accurate as polyamide 12 but it will fit the requirements of technical parts.
Nylon 12 Glass-filled(Black)
SLS · Black
The surface of Nylon 12 Glass-filled(Black) is black and slightly granular and porous. Nylon Glass-filled is more durable and resistant than Nylon PA12. It gives you great freedom in your designs allowing for both complex and inclosed volumes. The material is great for technical parts that need resistance and loads. The surface is not as accurate as polyamide 12 but it will fit the requirements of technical parts.
